此前，我們參觀了比亞迪在Xi的的工廠。事實上，就在上次參觀的同時，比亞迪在這座古城的第二家工廠也在有序生產。這是比亞迪投入使用的新工廠，最高設計年產能為40萬輛。再加上最大設計年生產能力30萬輛，比亞迪僅在Xi的的最大生產能力就可以達到70萬輛！
0
1
2
3
[page]
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
[page]
9
0
1
2
3
4
5
6
7
8
9
0
1
2
Editor's summary:
A brief visit to the factory will certainly not present the detailed content-jndp and comprehensive information as we did before. Although the visit process is very hasty, we can still have a preliminary understanding of the factory through the only set of pictures.
The stamping workshop has the ability to start multiple stamping lines at the same time. However, according to the situation we have seen, the automation degree of the open stamping line is not high, but we will have to wait for a more in-depth visit in the future before we can give a reasonable conclusion to the whole stamping workshop. However, it is a condition that many other factories do not have.
The main welding line in the welding workshop is the production line with the highest degree of automation in the whole welding workshop, and to evaluate the automation rate of a welding workshop, all sub-assembly lines should be included in the comprehensive evaluation. This time, the production situation of sub-assembly lines is missing in the article because of the visit time, and we will make up the relevant content-jndp next time.
The visit time of the painting workshop was short, and the water-based paint left a deep impression on me. After all, some joint-venture brand factories still use oily paint that is not conducive to environmental protection, which should be affirmed by BYD Xi 'an No.2 Factory.
As far as the assembly workshop is concerned, we are more concerned about the layout of the sub-assembly line. At ……
目前，我們對它的信息很少，但現在，儀表板和車門都是在主裝配線上組裝的。如果我們能有自己的子裝配線，就更容易控制裝配質量。此前，我們參觀了比亞迪在Xi的的工廠。事實上，就在上次參觀的同時，比亞迪在這座古城的第二家工廠也在有序生產。這是比亞迪投入使用的新工廠，最高設計年產能為40萬輛。再加上最大設計年生產能力30萬輛，比亞迪僅在Xi的的最大生產能力就可以達到70萬輛！
0
1
2
3
[page]
4
5
6
7
8
9
0
1
2
3
4
5
6
7
8
[page]
9
0
1
2
3
4
5
6
7
8
9
0
1
2
Editor's summary:
A brief visit to the factory will certainly not present the detailed content-jndp and comprehensive information as we did before. Although the visit process is very hasty, we can still have a preliminary understanding of the factory through the only set of pictures.
The stamping workshop has the ability to start multiple stamping lines at the same time. However, according to the situation we have seen, the automation degree of the open stamping line is not high, but we will have to wait for a more in-depth visit in the future before we can give a reasonable conclusion to the whole stamping workshop. However, it is a condition that many other factories do not have.
The main welding line in the welding workshop is the production line with the highest degree of automation in the whole welding workshop, and to evaluate the automation rate of a welding workshop, all sub-assembly lines should be included in the comprehensive evaluation. This time, the production situation of sub-assembly lines is missing in the article because of the visit time, and we will make up the relevant content-jndp next time.
The visit time of the painting workshop was short, and the water-based paint left a deep impression on me. After all, some joint-venture brand factories still use oily paint that is not conducive to environmental protection, which should be affirmed by BYD Xi 'an No.2 Factory.
As far as the assembly workshop is concerned, we are more concerned about the layout of the sub-assembly line. At ……
目前，我們對它的信息很少，但現在，儀表板和車門都是在主裝配線上組裝的。如果我們能有自己的子裝配線，就更容易控制裝配質量。
標簽：比亞迪
9月23日，十幾輛上汽榮威新能源車出現在了北京汽車博物館的門口。
1900/1/1 0:00:00在全球汽車論壇第五屆年會GAF2014上，針對環保和新能源汽車，
1900/1/1 0:00:00今年以來，隨著國家一系列鼓勵電動汽車發展的政策相繼出臺，電動汽車開始大踏步走進普通消費者家中，有報道稱，僅北汽E150EV前8個月就賣出3000多輛車。
1900/1/1 0:00:00為了提振福克斯電動版萎靡不振的銷量，福特日前對這一車型實施了上市以來的第二次大幅降價。
1900/1/1 0:00:00當比亞迪插電式混動車型秦的累計銷量逼近1萬輛時，王傳福認為自己找到了那把啟動新能源汽車市場的“鑰匙”。“之前，消費者不買E6的賬，是因為有里程焦慮，現在插電式混合動力解決了這個問題。
1900/1/1 0:00:002014年10月1617日，第五屆全球汽車論壇在中國武漢舉行。本屆論壇由貿促會汽車行業分會主辦，以中國汽車產業轉型升級之智慧與遠見為主題。
1900/1/1 0:00:00
汽車導航